Issue |
E3S Web Conf.
Volume 12, 2016
i-DUST 2016 – Inter-Disciplinary Underground Science & Technology
|
|
---|---|---|
Article Number | 04002 | |
Number of page(s) | 7 | |
Section | Microelectronics Materials, Devices and Systems | |
DOI | https://doi.org/10.1051/e3sconf/20161204002 | |
Published online | 05 December 2016 |
On the investigation of voltage controlled oscillator phase noise for IoT applications
Aix-Marseille University, IM2NP UMR CNRS 7334, Technopole château Gombert, 13013 Marseille, France
Voltage controlled oscillator (VCO) is one of the key elements in radio frequency (RF) transceivers. A VCO working at 2.4 GHz and designed in CMOS technology is presented. It is suitable for low-cost and low-noise applications using wireless standards such as ZigBee, Bluetooth, Wi-Fi and WPAN (Wireless Personal Area Network). The noise characteristics of this RF VCO are investigated. Noise measurements, especially, phase noise are achieved under different environmental conditions.
© The Authors, published by EDP Sciences 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).