Open Access
Issue
E3S Web Conf.
Volume 88, 2019
i-DUST 2018 – Inter-Disciplinary Underground Science & Technology
Article Number 05001
Number of page(s) 9
Section Microelectronics Devices and Systems
DOI https://doi.org/10.1051/e3sconf/20198805001
Published online 22 February 2019
  1. M.A. Razzaque, et al., “Middleware for Internet of Things: A Survey”, IEEE Internet of Things Journal, 3, 70-95 (2016) [CrossRef] [Google Scholar]
  2. Gartner, “IoT rapid prototyping to proof your business case”, Gartner Symposium/ITxpo (2015) [Google Scholar]
  3. K. Wang, et al., “A 1.8mW PLL free channelized 2.4GHz Zigbee receiver utilizing fixed LO temperature compensated FBAR resonator”, IEEE ISSCC Dig. Tech. Papers, 3, 372-374 (2014) [Google Scholar]
  4. D. Ghosh and R. Ghapurey, “A power efficient receiver architecture employing bias current shared RF and baseband with merged supply voltage domains and 1/f noise reduction”, IEEE J. Solid State Circuits, 47, 381-391 (2012) [CrossRef] [Google Scholar]
  5. M. R. Basar and F. Malek, “A low power 2.4-GHz current reuse VCO for Low power miniaturized transceiver system”, IEEE Int. Conf. Electronics Design Systems and application, 230-233 (2012) [Google Scholar]
  6. C.L. Yang and Y.C. Chiang, “Low Phase-Noise and low-power CMOS VCO constructed in current-reused configuration”, IEEE microwave and wireless components letters, 18 (2008) [Google Scholar]
  7. M.T. Hsu, et al., “Design of low phase noise and low power modified current-reused VCOs for 10 GHz applications”, Microelectronics Journal, 44, 145-151 (2013) [CrossRef] [Google Scholar]
  8. D. Fathi A. G. Nejad “Ultra-Low Power, Low Phase Noise 10 GHz LC VCO in the Subthreshold Regime”, scientific research journal, Circuits and Systems, 4, 350-355 (2013) [CrossRef] [Google Scholar]
  9. D. Park and S. Cho, “Design techniques for a low-voltage VCO with wide tuning range and low sensitivity to environmental variations”, IEEE Trans. Microw. Theory and Techniques, 57, 767-774 (2009) [CrossRef] [Google Scholar]